Kawasaki Brute Force 750 MudSlinger Slip-On with S-Bend Installation...
download Remove the stock muffler and rear cylinder head pipe as described in your owner’s manual. Retain the stock fasteners for MudSlinger installation. (Do not remove the front cylinder head pipe;...
View Article2007 Yamaha V-Star 1300 Classic Straights Installation Instructions
download Stock Exhaust System Removal 1. Remove right side Foot peg assembly or Floorboard. (Whichever is applicable to your model.) 2. Remove bolts that are holding pipes at rear mounting bracket. 3....
View ArticleYAMAHA Road Star Fuel Pump Relocation Kit INSTALLATION MANUAL
download 1. Remove seat and disconnect battery. Remove fuel tank along with both left and right side battery covers, and remove air box from carburetor (all per Yamaha standard shop manual procedures)....
View ArticleHONDA VTX 1800 AND VTX1300 SWING ARM COVER INSTALLATION INSTRUCTIONS
download 1. Remove the two (2) 6mm bolts holding the brake hose clips in place. 2. Slide the cover in from the rear over the swing arm and align the holes. (NOTE: on Retro models and some aftermarket...
View Article2002 Honda VTX 1800 R & S 3” BIG Straights Installation Instructions
download Remove right side Foot peg assembly or Floorboard. (Whichever is applicable to your model.) 2. Remove O2 sensors from each muffler and cover with supplied cap plug. 3. Loosen clamps at...
View ArticleYamaha Stratoliner 2006 3" Big Straights REMOVAL AND INSTALLATION MANUAL
download 1. Remove right side Foot peg assembly or Floorboard. (Whichever is applicable to your model.) 2. Remove bolts that are holding muffler at rear mounting bracket. 3. Remove Cables from exhaust...
View ArticleHARLEY DAVIDSON WIRE LOOM AND HORNS INSTALLATION INSTRUCTIONS
download Remove the stock horn and bracket from the stud it is mounted to and unplug the 2 wires. Remove the seat. Route the end of the wire and hose loom without the connectors. Starting in front of...
View ArticleHarley davidson American Classic Straights on a 1988-2001 VLX 600 Shadow...
download Remove right side Foot peg assembly or Floorboard. (Whichever is applicable to your model.) 2. Remove bolts that are holding pipes at rear mounting bracket. 3. Loosen clamps at mufflers. 4....
View Article
